How can you pick a good smart drying rack?
Time:
2023.07.20
Intelligent clothes dryer is actually a kind of electric clothes dryer, compared with manual drying and hand drying racks, it can effectively solve all kinds of clothes drying troubles encountered in our lives: rainy days, cloudy days, snowy days, clothes are difficult to dry; Drying clothes and quilts, laborious and long, in addition to can also be used as a balcony light, very convenient, so it has been loved by many families. But there are all kinds of clothes dryers on the market, how can you choose a good smart clothes dryer? Meiju is here to support you!
Basic functionality
This is the most basic function of the clothes dryer, which is easier to use than the hand-cranked drying rack, and the lifting and lowering of the drying bar can be freely controlled by remote control, and all you have to do is hang the clothes on it. The biggest advantage of this function is that it saves effort, no need to hang the clothes fork one by one, or take the joystick to rotate there, if you dry the quilt, you can directly spread the quilt on the quilt rod, press the remote control to raise all the clothes up, very convenient, the elderly can also use.
One of the basic functions of the clothes dryer, most of the clothes dryers now haveLED lights, but is there any knowledge of this LED light? Yes, according to the scientific lighting ratio, the best light of 1 square meter space is 4 watts, while the general balcony is about 4-5 square meters, suitable for 16-20 watts of LED lights, so that the balcony is bright and does not cause light energy waste, but also saves electricity.
In addition, some clothes dryers on the market have one LED light, and some have two or more, how to choose this? Here it is recommended to choose one, in fact, multiple LED lights only look more beautiful, but the lighting range overlaps, waste part of the light energy, and consume electricity. From a practical point of view, one light is enough.
One of the practical functions of the clothes dryer, if you encounter bad weather: cloudy, rainy, snowy, clothes not dry, this function is very useful, through the built-in fan fast and continuous air supply, to achieve the effect of rapid drying, generally about 3 hours. If it is dried naturally, it may take several days or even longer, and the clothes that are dried in this way are prone to odor.
Before the Meipartner smart clothes dryer was not on the market, the automatic function of the clothes dryer on the market only refers to the automatic rise of a single function, when drying, drying and disinfecting clothes, the functions can not be automatically switched, you need to wait for the end of the previous function before manually switching to the next function, such as lifting the clothes need to manually switch to the air drying mode, 3 hours after air drying needs to manually switch to the disinfection mode, can not be like a fully automatic washing machine automatically complete the water intake, Rinse, drain, dewater and a series of functions. Means wasting time and effort.
After the launch of the Meibaoju intelligent clothes dryer, a real sense of automatic clothes dryer appeared in front of consumers, it can be like a fully automatic washing machine, automatically complete a series of rising, air drying \ drying, disinfection a series of drying functions, meaning that you can operate other automatic home appliances, press a key OK, saving most of your waiting time, very smart, very convenient.
Material
Meiju patented DC frequency conversion 24V twin turbine silent bearing motor,
Long service life, large torque, convenient electricity and other characteristics
Can I not use it?
This is a problem that consumers are more likely to ignore, the load-bearing of the clothes dryer has two places, one is static load-bearing, which refers to the maximum weight that the clothes rod can bear when it is stationary, and the strength of the wire rope is related, generally #304 wire rope is appropriate.
The other is the rising load-bearing, which refers to the maximum weight of the clothing that can be pulled by the drying bar when rising, which is positively related to the torque of the motor. Wouldn't that be power-hungry if it was going up? Rest assured, the general motor of about 100-120W, under the condition of load, lifts and lowers four times a day (drying clothes + collecting clothes), a year Don't be wrong It's about 5 degrees of electricity a year, which is only a few dollars, but it saves a lot of time and energy for drying.
High-quality clothes dryer host and scissor holder generally use aluminum alloy, the advantage is anti-corrosion, no rust, not easy to deform, and iron host and scissor holder first easy to rust, secondly, iron material hardness is not high easy to deform, of course, the cost is lower than aluminum alloy, everyone should pay attention when buying.
The support plate of the clothes dryer is an important part of connecting the scissor holder and the drying rod, some clothes dryers use a single layer support plate, only two force points, easy to deform after a long time, and the double-layer thickened support plate has four force points, more firm, so that the windproof ability of the clothes dryer is greatly improved.
The traditional hand-cranked drying rack pulls the wire rope through pulleys and reels, and the long-term friction between the pulley and the wire rope, the wire rope and the wire rope, is easy to wear and break, and the general life is about a few years. Now most clothes dryers have reels to ensure that each section of wire rope has a corresponding groove, avoiding the interwinding and wear of the wire rope.
Meibaoju smart home official website
Welcome to follow the WeChat public account gdzsmbj to learn more about product consultation and corporate dynamics, you can also set a small goal, such as sharing this article first.